Write a Review

The Beetle X Phone Bag is designed to place any phone on your Top Tube or Stem for easy access to your phone, energy bar, phone, wallet, or other small items. Any smartphone with or without a case will fit (iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone 10, etc.). - 4 multi-positional straps for mounting - Straps are extra-long, so cut to the desired length - Fits the largest phones with large cases - Phone is operable & audible while in the case - Good size for wallet, energy bar, and wallet - Made of 840 denier nylon & polyester - 7" x 3 1/2" x 2 1/2"

Bearings for Cane Creek AER headsets. - Aluminum Bearing

Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

Pumping out an attention-grabbing 300 lumens with OptiCube lens technology, the versatile ViZ300 stands out with the power of Daytime Hyperflash mode and the friendliness of Group Ride mode. - 3 LEDs (300 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (30 lumens):5 hrs - Flashing (30 lumens):45 hrs - Group Ride (100 lumens):8 hrs - Daytime Hyperflash (300 lumens):10 hrs

Our Contour saddle is classic in its design but it's not just form over function. The subtle tail at the rear of the saddle allows you to put a little extra power down without sliding off the back end. Multi-stage foam and dual-coil spring suspension provide a comfortable ride. - Size: 11.25" long x 11" wide - Contoured bucket design - Padding: Multi-stage foam - Suspension: Coil spring - Use: Cruiser - Rail: Steel - Cover material: Soft-Touch vinyl - Gender: Unisex

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Steel

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Included

Aluminum

Instant bike dashboard Perfect for any enthusiast, Delta's bicycle phone mount allows you to securely display your mobile device while riding. Using a built-in lock mechanism, your plus-sized smartphone is secured safely with multiple grip points and bumpers, to prevent shock and reduce vibration on rough terrain. Adjust the angle of display for convenient viewing while riding to easily access navigation, answer that important call or stop for the perfect photo opportunity. Features Securely Displayed - Weatherproof bungee and rubber inserts keep phone secure and protected while Delta's patented cam lock provides added security for your mobile phone on rough terrain. Compatibility - Bicycle mobile phone mount compatible with phones 3.5 inch wide x 0.5 inch depth x 7.8 inch length (up to iPhone 8+ Plus and Samsung Galaxy 9+ plus). Easily Accessible - Sliding system allows for easy in and out while on the go, so your phone is available for an important call, adjusting navigation, and you'll never have to miss the perfect photo opportunity. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm Weight - 0.17 lbs / 80 grams

Best In Class You're never more than an arm's reach from your smartphone, and Delta's bicycle phone mount provides convenient and visible placement for your phone. With your phone securely mounted to your stem OR handlebar, with multiple options available, you can use navigation apps to reach your destination and always stay connected to loved ones with proprietary access to Face ID and Touch ID for new generation devices. Features Secure Display - Built-in locking mechanism ensures your mobile phone is securely held and mounted to your bicycle yet is adjustable for convenient display while riding. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your phone in your desired location, suitable for every bike. Includes additional ElastoMount to connect to any bar and for quick on/off. Secures to handlebar diameters up to 1 3/8"/35 mm Accessible - Stretch fit design provides easy in & out access to your device—spend more time riding and less time fumbling during an important call or when a change of route is needed. Trusted Quality - Integrated silicone bumpers protect your mobile device from scratches and reduce vibration while riding. Don't let rough patches or bumps deter you from your adventurous ride. Weight - 0.24 lbs / 110 grams

Wet weather is no worry when you've got Electra's Cruiser Essential Aluminum Fenders. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Rack it. Stack it. Pack it. Make life easier and your bike cooler MIK stands for Mounting Is Key, and this rad rear rack comes equipped with this functionality. Because easy is the name of the game. Easy on. Easy off. - Compatible with MIK accessories - Alloy 12mm diameter bars - Carrying capacity up to 27kg or 60lbs - Stainless steel hardware included - Rear rack designed to be compatible with all Electra 26", 27.5" and 700c wheels - Compatible with approved child seats

Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

- For long tours these pads offer safety together with excellent performance in all situations. - For MT disc brake 2 piston - 2 single brake pads, 2 pad retaining bolts

- Heavy-duty device that cleans chain in seconds - The kit includes a 75 ml bottle of Drivetrain Cleaner that can be either sprayed over the drivetrain or poured into the top reservoir - Liquid release button ensures the application of the cleaner is quick and easily controlled. - Abrasive cleaning teeth and rotating brush wheels which have 120 contact points cover every part of each chain link for a deep and thorough clean - Excess dirty fluid drops into a second lower reservoir so it’s kept away from the clean chain

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. The durable composite body features our iconic three-way wrench shape and prevents scratching of expensive components. Angled ends allow for safe installation and removal of Shimano Di2 E-tube EW-SD300; wires in tight spaces. Universal coin cell tool helps remove and install battery covers on SRAM AXS and other electronic accessories. - Compatible with Shimano Di2 E-tube, EW-SD300 wires (nominally 3 mm OD connector) - Not compatible with Shimano Di2 E-Tube EW-SD50 wires (nominally 5 mm OD connector) — use the Park Tool EWS-1

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever. - Sold individually, the clamp can be mounted to the right or left side - Hinged clamp for easy installation without removing other components - Black Anodized, CNC AL-6061 Aluminum - Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes - 23g

Lighten Your Bike, Not Your Wallet. Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - DT Swiss 350, Center Lock, Sealed Cartridge bearings, DT Swiss Star Ratchet internals,142x12mm thru-axle compatible - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24F and 24R - Spoke Pattern: Two-cross (1:1) Front and Rear - Spoke Type: DT Swiss Aerolite T-head - Weight: Front - 601g; Rear - 764g

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Caliper only - does not include lever or hose. - Includes steel-backed organic pads

Fully wireless electronic shifting. Fully hydraulic disc braking. The SRAM RED eTap AXS HRD shift-brake system is the future. And the future is custom. AXS enabled and easily personalized for hand size and reach, this is the best shifting and braking experience — for all riders. - AXS-enabled for easy personalization - Simple and intuitive eTap shift logic - Personalize for your hands and preferences using the Contact Point Adjustment and separate Reach Adjust with HydroHC brake platform - Newly textured shift paddles and hoods for a better feel - Two ports for Blips on each lever - Bleeding Edge technology for easy and clean brake bleeds - Available in flat mount and post mount caliper options

Road riders are going beyond where we’ve ever gone before. We’re going further and faster. And when the road stops, we keep going. One thing hasn’t changed: We want to push those boundaries without any distractions. So we made eTap AXS for today’s riders. The result: an intuitive, high-performance groupset that means you can focus on what’s most important—your ride. Exploring new limits has never been easier. SRAM RED eTap AXS—Simply Beyond. Upgrade kit includes: - Shifters - Rear Derailleur and battery - Charger and cord - Quick Start Guide

EMT Tool with slotted screwdriver, 3mm, 4mm, 5mm, 6mm, 8mm, T25 Cradle and bracket to mount on Rib Cage or Zee Cage

Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges

- Head/Hose for Air Tool UHP pump

Easy-access handlebar holder for a bottle, snacks, or other small items. Helps keep hydration and spirits up on warm, high-intensity days in the saddle. A cinch-and-release snowlock closure makes for easy handling and keeps contents in place on bumpy rides. Made from durable Vinylon with an all-around foam padding for structure and ease of use. Attaches to the handlebar post with up to three Velcro straps. Can also be attached to the webbing on the front of the Specialized/Fjällräven Handlebar Bag. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Semi-soft design in Vinylon F with foam padding and recycled nylon lining. - Single-hand operated cinch lock. - Front pocket in mesh fabric for energy bars or snack wrappers. - Eyelet in the base drains out water. - Fits bottles up to 75 mm in diameter. - Material- Vinylon F (100% vinylal)