Safety

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

- Clamp-on mirror made from high-impact, heavy-duty nylon fiber composite - High-quality glass with anti-glare properties provides an extremely clear image - Adjustable head allows fine-tuning of the view angle

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

- Great novelty horn - Fits most handlebars

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

• Double-sided, high-visibility material • Safety orange triangle flag • Axle mount design

• 1-front reflector (steerer tube mount) • Bracket

•Classic Bugle design •Clamp fits most handlebars

Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g

The perfect way to say 'Hello.' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Easy-to-push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: Universal - Material: 7075 Aluminum Alloy

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

- Alloy lever action safety bells perfect for kids bikes - Sturdy alloy construction with an adorable insect or animal on top

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

Give yourself 360 degrees of visibility with Sunlite's Sport Helmet Mirror. It mounts to either your glasses or to your helmet and has a fully adjustable arm for maximum viewing angle.

- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount

The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger. - Dome Diameter: 43mm (1.7') - Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters

Designed for touring and commuting or just about anytime you need added visibility; the UltraLite Bike Mirror offers versatility; light weight; and durability. At less than 2 ounces, it provides an amazingly wide field of view. Can be mounted almost anywhere you need it on your bike—handlebars of all types as well as forks and challenging applications like recumbents.

Look back at it Add a touch more personality and a touch more safety. Install, adjust and ride. It's that easy. Objects in mirror are more awesome than they appear. - Can be adjusted for use on right or left side of handlebars - Designed to fit on capped open-ended grips - Mirror dimensions: 10 cm wide x 6 cm tall x 10 cm long arm

• Plastic body w/ ball joint • Acrylic convex mirror • Press fit into bar end

The perfect way to say 'Hello' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through. And do it in style. - Cheerful 'ding-dong' doorbell style ring - Includes attachment hardware

Give yourself 360 degrees of visibility with Sunlite's Sport Helmet Mirror. It mounts to either your glasses or to your helmet and has a fully adjustable arm for maximum viewing angle.

Drawing inspiration from Raijin, the Japanese God of Thunder, the Incredibell Raijin boasts a remarkable sound level exceeding 85 db., ensuring you're heard loud and clear. Crafted with exceptional quality at the forefront, every bell is a dedication to durability and superior performance. The Raijin with its ingeniously designed dinger can be rotated to any position. This gives you great flexibility in mounting the bell anywhere on your handlebar, making it convenient to use either your thumb or another finger to ring the bell. Fits 22.2 or 25.4mm bar.

Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes. - Dome Diameter: 51mm (2") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

•Lightweight, compact design •Easy-read compass •Alloy construction

- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror

Universal bike mirror for handlebar ends The Cyclop is a bicycle mirror designed for bicycle touring or urban use. It has 3 axes of orientation allowing the mirror to be perfectly adapted to your needs, also offering the possibility of folding it under the handlebars to store it or when passing between two vehicles. Made in France, this mirror comes with a 46cm² mirror that helps to warn the user of any danger coming from the rear. Reversible, it can be placed on the right or left side of the handlebars.

Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors. - Hardware not included