Brakes/Levers/Pads

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

The BB5 offers our Tri-Align Caliper Positioning System, tool-free pad replacement, a melt-forged body and an inboard pad adjustment knob. One try and you'll wonder if the BB5's are really entry-level brakes. - Mechanical simplicity

With gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated cable stop spring tension adjustment ensures that our standard is everyone else's goal. - Mechanical simplicity - Adjustability

Shimano Deore hydraulic disc brakes are a solid setup, offering reliable power and rigid brake design for all riding styles, from XC to trail. The BL-MT500 brake levers deliver high-powered Servo Wave performance for rapid initial pad contact, along with I-spec II compatibility. These are paired with powerful 4-piston MT520 calipers that help boost rider confidence and enjoyment. - Highly responsive braking power for greater control and modulation - Sleek and durable master cylinder design - 4-piston calipers provide a wider pad contact area - Heat insulated pads and pistons

The G2 CleanSweep design helps keep dirt and grime from mucking up your ride. - Ideal complement for the BB disc brakes.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc. KEY FEATURES - Round edge braking surface - Custom steel braking surface riveted to an aluminium central carrier - Standard 6 bolt fitting - Available in: 140mm & 160mm - Floating design deals with changes in temperature - Weight: 115g - Available in black, silver, bronze, red, blue, purple & orange

The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.

Jagwire's Pro LR2 rotors are made to improve the performance of any disc brake-equipped bike. Utilizing a 2-piece construction design, the LR2 rotors have a stainless steel braking surface to provide quiet, consistent stopping power. The lightweight aluminum inner spider features an integrated concentric ring and reinforced rivet joints to resist warping and improve durability. - Stainless steel machined braking surface resists corrosion and is tuned to reduce braking noise - Aluminum spider helps keep weight to a minimum - Compatible with all popular disc brake pad compounds (organic/resin, metallic, and semi-metallic) - Available to fit on ISO 6-bolt or Center Lock hubs, Jagwire offers options for nearly any disc brake bike - 6-bolt rotors include T25 mounting hardware - NOTE: LR2 rotors are NOT compatible with brakes with pads extend that below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1

The Shimano Deore SM-RT54 disc brake rotors provide exceptional stopping power in all riding conditions. Shimano's Center Lock mounting system makes installing and removing rotors quick and easy thanks to the spline mount and lockring design. - Includes standard rotor lockring - External-type rotor lockring required when installing onto 15/20mm axle hubs (sold separately) - For use with resin pads only

•Designed for cantilever & caliper brakes •Aluminum construction •2.5 finger •22.2mm (7/8") clamp •171g pair •SHIMANO Equivalent BL-R550 / BL-3500

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM and Zipp offer rotors and wheels, respectively that are compatible with the Center Lock disc rotor mounting system developed by Shimano. Center Lock offers a secure hold and perfect fit with fully compatible rotors that makes it simple to remove and install a rotor. Most road and gravel disc brake wheelsets feature the Center Lock spline system. These Zipp Center Lock Disc Lock Rings are what is referred as the external serration design, and meant to interface with a 16T/44-45mm (OD) external bottom bracket tool. Zipp is offering two versions, one for 140mm and 160mm rotors (common for road and gravel bikes), and a second for rotors from 170-203mm sizes (most common on mountain bikes). Both are machined from aluminum and feature a floating stainless steel washer on the hub interface side. Features - Center Lock disc rotor lock ring with external serration (tool interface) - Tool interface is a 16T/44-45mm (OD) type used on external bottom brackets - Compatible tools: Park BBT-9, Park BBT 69.4, Shimano TL-FC33, Chris King and many others - Machined aluminum body and threading - Floating stainless steel washer - Rotor size options: 140-160mm, 170-203mm (listed as 180mm in the selection menu) - Color: Anodized Black - Weight: 8.1 grams (140-160mm)

Compatibility: Promax DSK320, DSK400, DSK610J, DSK50J, DSK700, XNine

Forged alloy brake levers are designed for use with V-Brake or Disc brake applications. - Comfortable 3-finger brake lever.

The Problem Solvers Double Barrel Brake Lever lets you operate 2 brakes with this one brake lever. It is made of light, durable aluminum with a steel clamp bolt and aluminum adjusting barrels.

- Pad sets include pads and retraction spring for one caliper

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance

- XT-grade 6-bolt rotor - Stainless steel braking surface for long lasting durability - Cutouts help with mud clearing and cooling - Large forged alloy spider supports rotor surface, increasing rigidity and heat dissipation while reducing weight - Comes complete with mounting hardware

Shimano Deore XT SM-RT86 6-Bolt Disc Rotors feature ICE cooling technology and a mud shredding rotor blade design to keep the rotor cooler and cleaner. - ICE technology features a 3-layer structure with an aluminum core and two stainless steel outer layers to reduce rotor surface temperature by approximately 100 degrees Celsius compared to all-steel rotors - Lightweight, heat-resistant design for less fade, less noise, and longer pad life - Mud shedding rotor blade design helps to keep the rotor cleaner - Includes rotor fixing bolts and non-turn washers

The TRP R2 1.8mm 1-piece 6-bolt stainless steel disc rotor features consistent operating temperatures and built in wear indicators. Designed to give powerful and stable braking in all conditions. - 1.8mm standard thickness for use with Quadiem, Slate, G-Spec DH, G-Spec Quadiem, G-Spec Slate and select Tektro models - High heat dispersion and tolerance - Anti-vibrated noise - Three individual wear indicators - Includes 6 stainless steel bolts - Features a clear "Rust Blocker" treatment on arms to help prevent corrosion

The Tektro TR-35 1.8mm center lock disc brake rotor is crafted with stainless-steel to provide durability, corrosion resistance and high heat tolerance. - Stainless-steel construction offers durability, corrosion resistance, and high heat tolerance - Steel center-lock mount type - Lock-ring sold separately

Compatibility: Shimano Ultegra, Br-GRES805, BR-GRE505.

Single piece, 1.8mm thick rotor made from high quality 120 CR grade steel

Compatibility: Shimano XTR 2007 (M965-M966), Saint, Deore LX 2005 Pad Material: Organic

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Length of Pad: 70mm - Pad Color: Black - Hardware Color: Black - Post Orientation: Offset