Wheels

Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flickable, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie"? is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. - Front Spoke Pattern: Two-cross - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Front - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1690g

All-mountain products need to make long climbs tolerable and tame wild singletrack trails. The light, wide, tubeless-optimized rim means that the M 1900 SPLINE is more than up to the challenge and always looks good with its reliable, lightweight, high-quality pawl hubs.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Included

- 6 pawl/54 point/6.6-degree engagement - Cassette bodies for Elite Series CX/GX/MT/FB-1110 hubs - Sealed bearings

Steel

Aluminum

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Thread Pitch: 12 x 1.0mm

- End cap for Origin8 MT-3200 hubs - Spacing / Axle: 148mm

V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

These lightweight valves help prevent clogging from tubeless sealant. - Aluminum - 40mm length

Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.

On today's raod forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic front hubs to 9mm - One pair required for each hub to be converted

On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic mountain hubs to quick release - One pair is required for each hub to be converted

Aluminum Tubeless Presta Valve - MTB or Road - 18-25mm for Asymmetric Rims

Tubeless valves for DT Swiss rims for repair or replacement. - DT Swiss Narrow Base Tubeless Valve - 73mm

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

- Replacement steel quick release skewers

- High-quality fat bike rim strips - Super durable PVC material

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.