Closeouts

Caffeinated Tailwind meets all your calorie, hydration, and electrolyte needs just like you'd expect, plus it adds 35mg of caffeine per 100 calories. Caffeine is proven to significantly enhance high-intensity and endurance performance. - Caffeine boost when you need that extra kick - Complete calories, electrolytes, and hydration: Ditch the gels, chews, and pills, and go all day with just Tailwind. - No gut bombs: Stomach problems? You’ll love Tailwind. Unless you enjoy being doubled over, retching. - Tasty all day: Clean, light flavors taste better the longer you go. - Hydration pack love: Dissolves on contact and cleans up with a quick rinse. No film, aftertaste or science experiments! - All natural: Crystal clear with no dyes, preservatives or 4-syllable magical ingredients. USAGE Usage is similar to regular Tailwind except that we recommend limiting continuous use to 6 hours or less to avoid building up a high concentration. Each scoop contains 100 calories and 35mg of caffeine. For endurance workouts, mix 2-3 scoops per 24 oz of water per hour. Adjust to your personal calorie needs during training, using hunger as a guide. When it’s dialed in, you’ll feel satisfied and energetic, not hungry or full. On hot days, keep the same calories per hour, but increase water. To use in combo with other foods, reduce Tailwind intake by the calories you’re consuming elsewhere to avoid overloading the gut. For shorter workouts (<2hr), you can use less Tailwind to taste. Tailwind stick packs are perfect for fueling on the go. Just tear and pour into a water bottle for 200 calories of Tailwind goodness, no mess, no fuss.  ALL NATURAL AND ORGANIC INGREDIENTS Non-GMO Dextrose (Glucose), Non-GMO Sucrose, Citric Acid, Sodium Citrate, Sea Salt, Organic Flavor, Potassium Chloride, Magnesium Citrate, Calcium Carbonate, Organic Caffeine Gluten free/vegan/no soy/no dairy

Tailwind stick packs are perfect for fueling on the go. Just tear and pour into a water bottle for 200 calories of Tailwind goodness, no mess, no fuss. - Complete calories, electrolytes, and hydration: Ditch the gels, chews, and pills, and go all day with just Tailwind. - No gut bombs: Stomach problems? You’ll love Tailwind. Unless you enjoy being doubled over, retching. - Tasty all day: Clean, light flavors taste better the longer you go. - Hydration pack love: Dissolves on contact with water and cleans up with a quick rinse. No film, aftertaste or science experiments! - All natural: Crystal clear with no dyes, preservatives or 4-syllable magical ingredients. USAGE Each serving is 100 calories. For endurance workouts, mix 2-3 scoops per 24 oz of water per hour. Adjust to your personal calorie needs during training, using hunger as a guide. When it’s dialed in, you’ll feel satisfied and energetic, not hungry or full. On hot days, keep the same calories per hour, but increase water. To use in combo with other foods, reduce Tailwind intake by the calories you’re consuming elsewhere to avoid overloading the gut. For shorter workouts (<2hr), you can use less Tailwind to taste. ALL NATURAL AND ORGANIC INGREDIENTS Dextrose (Glucose), Sucrose, Citric Acid, Sodium Citrate, Sea Salt, Organic Flavor, Potassium Chloride, Magnesium Citrate, Calcium Carbonate Gluten free/vegan/no soy/no dairy

Tailwind Rebuild is the first sport recovery drink based on a patent-pending perfectly complete protein. We start with organic rice protein, and supplement it with amino acids to make that protein complete. Then we add carbohydrates, some healthy fats from coconut milk, and just the right amount of electrolytes. Nothing repairs your muscles more efficiently, restores your energy faster, and makes you feel better sooner. And athletes love the great tasting healthy vegan ingredients. - Replenish glycogen stores: contains the right kinds and amounts of carbohydrates to restore your energy after a hard workout - Rebuild muscles: perfectly complete protein based on a patent-pending mathematical model to rebuild damaged muscle tissue and mitochondrial protein - Rehydrate and restore electrolytes: sodium, potassium, calcium, and magnesium to restore electrolyte balance USAGE Mix a packet of Tailwind Rebuild with 16oz (500mL) of water (shaken not stirred). Drink within the first 30 minutes after exercise. For longer or more intense workouts, follow with another packet of Tailwind Rebuild in the following 30 minutes. NATURAL INGREDIENTS AND ORGANIC FLAVORS Vanilla: Non-GMO Dextrose, Non-GMO Sucrose, Coconut Milk Powder, Essential Amino Acids (L-Leucine, LLysine, L-Valine, L-lsoleucine, L-Phenylalanine, L-Threonine, L-Methionine, L-Histidine, L-Tryptophan), Non-GMO Organic Rice Protein Powder, Sea Salt, Potassium Chloride, Organic Vanilla Flavor, Calcium Carbonate, Magnesium Citrate Chocolate: Non-GMO Dextrose, Non-GMO Sucrose, Coconut Milk Powder, Essential Amino Acids (L-Leucine, LLysine, L-Valine, L-lsoleucine, L-Phenylalanine, L-Threonine, L-Methionine, L-Histidine, L-Tryptophan), Non-GMO Organic Rice Protein Powder, Cocoa Powder, Sea Salt, Potassium Chloride, Calcium Carbonate, Magnesium Citrate Non-GMO/Gluten free/vegan/no soy/no dairy

Replacement buttons and straps for the Remora Aero Storage. - Rubber straps and buttons to secure the Remora Top Tube Storage container.

Specialized's 2Bliss Ready Rim Strips create a secure barrier, from sealant to rim, in a clean, simple to install strip. Mountain bike riders running 2Bliss can now change tires quicker and easier than with any other tubeless system. Diameter / Width - 26" — 23mm-559 PV - 26" — 25mm-559 PV - 650b — 31mm-584 PV - 650b — 39mm-584 PV - 29" — 23mm-622 PV - 29" — 25mm-622 PV - 29" — 31mm-622 PV

Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard

Designed for long-term use and durability, the Finish Line Mechanic Grip Gloves provide the ultimate in grip, protection, and dexterity. These reusable gloves make it easier to work on small, precision bike parts. Mechanic Grip Gloves are latex-free and feature a tactile-enhancing polyurethane coating that seals out grease, oil and grime. A textured surface on the palm-side of the glove provides enhanced grip, making it easier to work on small parts. Finish Line Grip Gloves feature a breathable upper fabric, which helps keep hands cool and dry. Mechanic Grip Gloves are easy to take on and off, so gearing up and down for mechanical repairs has never been easier. Unlike costly single use gloves, one pair of Grip Gloves can last for many weeks.

Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.

Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip

Replacement straps for installing an XLAB Torpedo Mount to your aero bars. Includes four hook-and-loop straps with bar grippers.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

• Forged aluminum • Integrated micro-adjust seat clamp

• Anti chain-suck device • Allows the front derailleur to be adjusted for strong downshifts • If not using front derailleur the device can act as a chain guide

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Presta Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

- Lightweight universal 1-piece, co-molded pad design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Brand Compatibility: Universal - Length of Pad: 55mm

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 14 x 2.125

- Hybrid tire for street or light trail use - Wire bead - Size: 26 x 1 3/8 (ISO 590mm)

- Entry-level BMX-style tire with sturdy casing for longevity - Size: 18 x 1.75

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 12 1/2 x 2 1/4

Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Cross country racing is demanding, requiring ultimate concentration plus confidence in every little part of your race rig. Specialized XC Race Grips are super light and provide an excellent bar feel that's more than just comfortable. Their low profile and great hand-to-bar contact delivers a feeling of confident control and superior handling over the most technical race courses. - Low profile design provides more direct feel and improved bar control. - Silicone/foam material provides optimal comfort and grip. Available in regular and XL sizes. - The grip's tacky texture provides added bar control. - Diameter: 30mm - Weight: 38g

Cross country racing is demanding, requiring ultimate concentration plus confidence in every little part of your race rig. XC Race XL Grips are super light and provide an excellent bar feel that's more than just comfortable. Their low profile and great hand-to-bar contact delivers a feeling of confident control and superior handling over the most technical race courses. - Low profile design provides more direct feel and improved bar control. - Silicone/foam material provides optimal comfort and grip. Available in regular and XL sizes. - The grip's tacky texture provides added bar control. - Diameter: 32mm - Weight: 40g

- Park/street tire, with directionally grooved tacky tread - Wire bead - Available in three widths

Your biggest supporter: thin, breathable socks with firm support. Our most popular cycling sock. The ASPIRE is engineered with firm compression and a thin profile for a responsive feel. Firm compression supports every contour of the foot to reduce fatigue during endurance activities. The Four height sits below the calf and its double-cuff construction provides extra support for cycling and trail running. - Thin profile is designed to fit into any technical shoe with a barely-there feel. - Firmly hugs the contours of your feet to support the arch and help reduce fatigue. - Built to provide maximum breathability with signature fibers that wick moisture, keeping your feet cool, dry, and blister-free. - 67% Nylon / 28% Olefin / 5% Spandex