Brakes/Levers/Pads

- K-Force rotors feature a two piece design balancing weight and braking performance. Weight relieved alloy carrier for added rotor stiffness - Afterburner rotors have an increased surface area for better heat management - Rotors include: (1) 6-bolt/44mmBCD rotor with (6) T-25 rotor mounting bolts - 98g K-Force, 142g Afterburner

Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

Full sintered metallic replacement pads for flat mount Hylex RS brakes. - Full metallic compound for maximum performance and power - Fits Hylex RS brakes - Color: TRP Copper - Sold per wheel

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.

• DIN standard design with anti-corrosion hardware • All weather compound • Centered post

Profile's 3/One Aluminum Aerobrake Levers are light and supremely aerodynamic, the perfect complement to your cutting-edge triathlon or time-trial bicycle. They boast feathery, stiff, and ergonomic 1-finger aluminum levers with a composite mount, and internal cable routing capabilities for optimum aerodynamics (cables sold separately).

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad Material: Steel - Compound: Semi-Metallic - Compatibility: Shimano M975,M966,M965,M800,M776,M775,M765,M665,M655,M601,M596,M595,M585,M545,M535, R505,S500,S501,T605,T665 / TRP Dash, Parabox Front

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

8 Series Disc Brake Pads - Disconnected two piece back plate - Race compound offers maximum stopping power for those who push their materials to the limits - Set of four disc brake pads for one MT5, MT7 Caliper

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Avid Juicy-3,5,7,Carbon,Ultimate,BB7,Mech2002-04 / PromaxDSK950

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Caliper only - does not include lever or hose. - Includes steel-backed organic pads

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion

•55mm cartridge inserts •Compatible with most road caliper brake pad holders •All weather performance

Shimano XT SM-RT76 6-Bolt Disc Brake Rotors Are Available in 160mm, 180mm, & 203mm. - Performance indicator: advanced (level 2 out of 3) - Self cleaning - Increased durability and less pad wear - Mount: 6-bolt - Diameter: 160 mm, 180 mm, 203 mm - Deisgn: 2-part - Material: stainless steel - Brake Pads Compatability: Metal, Resin

Jagwire's Cross Pro Brake Pads use a combination of mountain and road brake-pad technologies for excellent speed control, stopping power and durability so they're ideal for cyclocross use. These brake pads are cartridge style for easy pad replacement without losing your brake shoe adjustment. And there are wheel guides to make wheel installation faster and easier. The Cross Pros are available in threaded or threadless (post-mount) versions to fit most bicycles.

The short blade design of the Origin-8 Mini Trigger Brake Lever gives a clean, sleek look—with great stopping power—to your handlebars. • Designed for caliper & cantilever brakes • Cold forged double bent lever blade • 1-finger lever blade • 22.2mm (7/8") clamp • Short blade design • Left hand • 76g each

- Steel recessed brake mounting nut for thick fork crowns

- Stainless steel shim helps center the rotor perfectly within the disc brake caliper - Great for swapping wheelsets without the threat of brake drag

- Standard replacement cantilever/v-brake bosses

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel