Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$600.00
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg
$490.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
$483.00
The XG-1299 cassette completes the expression of the world's most accomplished and sought after bikes. Designed for use with our proven, reliable XD driver body, this 12-speed cassette offers a massive gear range. In independent tests, the X-Dome architecture is proven to yield the strongest cassette on the market. New shifting characteristics improve both inboard and outboard shifting as well as chain retention. - SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible Cogs - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
$450.00
Well known for its long body and flat profile, the Phenom is the shape of choice for many of the best racers in the world, ranging from Tour of Flanders winner Kasper Asgreen to World DH Champion Loic Bruni. Like every saddle we make, the S-Works Phenom with Mirror was ergonomically designed and scientifically proven - our Body Geometry methodology - combined with our Mirror 3D printing - resulting in 28% less pressure, right where it counts. Body Geometry: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don't just promise to solve these issues for men and women — we've scientifically proven they do. SOFT TISSUE RELIEF: Using a concave shape and ultra-compliant carbon shell, we've created a space for a thicker Mirror print, using 20,055 struts and 8,735 nodes - resulting in a 28% reduction in sit bone pressure compared to a traditional foam saddle, measured by our ultra high-resolution pressure mapping. PERFORMANCE-INSPIRED SHAPING: Being our longest and flattest saddle from tail to nose, the S-Works Phenom with Mirror's shape and construction enables maximum movement for optimal positioning for power - enabling riders to easily adjust their position on the saddle for tempo efforts and supports riders movement in and out of the saddle on climbs. - Patented Body Geometry technology is ergonomically designed and scientifically proven to increase blood flow to sensitive arteries. - Longest and flattest, Mirror saddle, from nose to tail to date at 27cm. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light oversized carbon rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - NOTE: Oversized 7x9mm carbon rails are not compatible with seat posts equipped with side-load clamp mechanisms for 7mm round rails. - Size 143mm / Weight 223g - Size 155mm / Weight: 227g
$450.00
The S-works Power Saddle with Mirror technology is the perfect reflection of you. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 190g - Size 155mm / Weight: 194g - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.
$450.00
We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle, we had to look beyond foam and develop a next-generation technology. The S-Works Romin EVO Saddle with Mirror is the future. We developed Mirror technology by 3D printing from liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 16,000 struts and 7,799 nodes, each of which can be tuned individually. And when you combine this technology with our extremely lightweight S-Works Romin EVO saddle, with its flex-tuned FACT carbon shell and ultra-light rails, you get a high-performance saddle that's designed to help you perform at your best. It features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort for your unique position. - Patented Body Geometry design is lab-tested for both men and women to assure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.
$449.99 $600.00 25% Off
SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs
$449.99 $600.00 25% Off
SMOOTHER IS FASTER Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance. LIGHTER At 1,645 grams, this is our lightest trail wheelset ever. STRONGER Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. CONTROL-BOOSTING VERTICAL COMPLIANCE 21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control. TRACTION MONSTER Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs. INTENDED USE Trail WEIGHT (29) 1,645g 240 EXP (with valve and tape) WHEEL SIZES: 29 2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs
$440.00
Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg
$440.00
Born on the World Cup, destined for your local trails. We poured World Championship-winning engineering into developing an all-new alloy for these Control wheels. To increase the new material's durability, we customized our shot peening process—where metal projectiles are shot at the alloy to increase its strength—meeting the precise demands of our XC riders. If that wasn't enough, to eliminate creaking and reduce weight, individually customized sleeves are chosen to bond every single rim. The result is a wildly over-engineered, trail-ripping, best-of-the-best, aluminum wheel; held to the same standards as our highest-end Control SL carbon components. Whether you are looking for a solid set of training wheels that will handle it all or a big upgrade from entry-level wheels, Roval Control Alloy is the go-to wheel. With creak-free hoop construction that's laced to high-performance and proven DT Swiss hubs, you can tap into a wheelset born from World Cup technology that's ready for all riders. - Rim: Control Alloy Asymmetric, 6013 Alloy Shot-Pened, 29", Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts - Rim Details: 19mm Depth, 31mm External Width, 27mm Internal Width - Hub: DT Swiss 350 Straight-pull 6-bolt, Star Ratchet 36t internals (10 degs), 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Two-cross (1:1) 28 count, R: 304mm, L: 304mm - Rear: Two-cross (1:1) 28 count, DS: 304mm NDS: 304mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Tire Size: 1.9" - 2.6" - Max Pressure: 1.9"-2.3": 40psi, 2.35"-2.5": 35psi, 2.51" -2.6": 30psi - Weight: Wheelset 1,648g, Front 768g, Rear 880g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, 19 and 31mm OD Endcaps, Lifetime Warranty System Weight Limit: 275lbs / 125kg
$415.00
The XG-1295 cassette carries with it the X-DOME architecture, which, independent tests have concluded, yields the strongest cassettes on the market. Shifting characteristics improve both inboard and outboard shifting as well as chain retention. - SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible Cogs - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
$413.95 $650.00 36% Off
When Specialized teamed up with Öhlins, they created the benchmark in DH shock technology. The TTX sets the gold standard for mountain bike performance. It uses a motocross-inspired internal bladder damper for the ultimate in small bump compliance and big hit capability. It's infinitely tuneable thanks to high- and low-speed compression, as well as rebound damping controls. And, ultra-precise spring rates ensure proper setup for a huge range of rider weights (springs sold separately). • Custom length for Demo (2011-2014)
$199.00 - $397.00
Comfort plays a big part in speed—that's why SRAM designed the Force 22 ErgoDynamic Shifters with an ErgoFit textured body and refined hood shape that improve grip and provide a smooth transition to the bar. These 2x11-speed shifters are crafted with carbon and magnesium for an incredibly low weight you'll notice as soon as you wrap your hands around them. Individual reach adjustment of the ErgoBlade brake and shift levers put the controls exactly where you want them. And, with an understated black finish, the Force 22 Shifters are a great match for any machine.
$374.99 $500.00 25% Off
The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there. ENGINEERED RIM The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made. 6013 ALLOY New 6013 alloy material finished with shot peening for impact strength and fatigue strength. OFFSET ADVANTAGE Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling. RIDE QUALITY Ride quality and impact targets derived from our factory enduro team riders. INTERNAL RIM 30mm internal rim width optimizes tire shape for the best traction. ENGINEERED SHAPE Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride. WEIGHT 1900g (with valve and tape). SPOKE COUNT F/R 28H Front and Rear HUB DT 350 Star Ratchet HUB ENGAGEMENT 36 Teeth / 10 Degrees INTERNALLY CANTED Internally canted bead shape ensures the bead bends inward for air pressure /tire retention under impact. INTENDED USE Trail, Park, Enduro WEIGHT (29) 1,904g (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs
$360.00
Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg
$339.00 - $359.00
It's the final piece in the drivetrain puzzle, and paired with SRAM RED eTap and RED rear derailleurs, SRAM's XG-1190 cassette delivers ultra-fast, ultra-quiet shifts that will always put you in the right gear. - Compatible with SRAM RED eTap, RED, Force, Rival, Apex - Weight: 151 grams (11 – 25T), 185g (11 – 30T), 196g (11 – 32T) - Material High grade tool steel cog cluster, Heat treatment process, Heat treated aluminum lowest range cog, Elastomer rings - Speeds: 11 Gear Ratios: - 11 – 25T: 11,12,13,14,15,16,17,19,21,23,25 - 11 – 26T: 11,12,13,14,15,16,17,19,21,23,26 - 11 – 28T: 11,12,13,14,15,16,17,19,22,25,28 - 11 – 30T: 11,12,13,14,15,17,19,21,24,27,30 - 11 – 32T: 11,12,13,14,15,17,19,22,25,28,32
$354.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush coil spring or highly tunable Solo Air spring - Includes Right PopLoc Remote - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered
$349.95 $690.00 49% Off
Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flickable, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie"? is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. - Front Spoke Pattern: Two-cross - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Front - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1690g
$279.99 - $339.00
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
$335.97 $479.95 30% Off
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
$335.00
Occupying a new realm in shifting performance, the redesigned XX1 Eagle derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1 shifting feel athletes rely on now features an updated cage geometry for improved chain management. Occupying its rightful place at the top of the Eagle ecosystem, the XX1 Eagle rear derailleur makes full use of the new 10-52T cassettes and is backward-compatible with 10-50T cassettes, as well. - Updated cage geometry provides better chain retention and crisper shifting - Comes in XX1 Eagle master colorway as part of Eagle Colorsystem to go with all cassette and chain color options - Backward-compatible with 10-50T cassettes, works with new 10-52T cassettes
$232.50 - $329.00 $309.00 - $329.00 Up to 25% Off
Saddle Up Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right. Less is More New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space. Full Coverage Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability. No-Sweat Installation Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp. Brilliantly Uncomplicated Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version. - Compatible with Matchmaker - Includes post only - Mechanical lever actuation - Head Type: Zero Offset—2 Bolt - Weight: 520g
$325.00
Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position. The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before. The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base. With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Titanium rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Approximate weight: 245g (Size 143mm) - Approximate weight: 251g (Size 155mm)
$325.00
Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position. The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before. The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base. With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you. - Titanium rails. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Approximate weight: 251g (Size 155mm) - Approximate weight: 245g (Size 143mm)
$325.00
The Romin EVO Pro with Mirror starts with our Body Geometry methodology and combines this with our game-changing Mirror saddle technology to create an unmatched combination of performance and comfort. The saddle is designed for riders that prefer an agressive, performance inspired position that still protects soft tissue and blood flow. The result? 26% less pressure, right where it counts. PERFORMANCE MEETS COMFORT: The new Romin EVO Pro with Mirror saddle uses the exact same 3D printed pad as the S-Works Romin EVO Pro with Mirror but now comes with a nylon and reclaimed carbon fiber shell and hollow Ti rails. Our Romin EVO has been a favorite for our professional athletes and racers everywhere season after season. Its traditional long shape is designed to relieve pressure in aggressive, race-inspired positions while allowing the rider to slide backward and forward on the saddle to provide the ideal position for tempo climbing or maximum wattage efforts. Now with Mirror technology, the saddle reduces pressure by up to 26% compared to traditional foam saddles, validated with extensive high-resolution pressure mapping studies. It uses a 3D printed matrix with 22,200 struts and 10,700 nodes and features a unique concave shell to deliver our thickest Mirror pad yet. To ensure your fit is dialed, it comes in two widths: 155mm and 143mm. BODY GEOMETRY AND MIRROR: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pain, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don’t just promise to solve these issues for men and women — we’ve proved they do. Unlike traditional single-density foam, Mirror technology allows for infinite density tuning with a single material. But any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retül data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. DURABILITY AND SUSTAINABILITY: By using reclaimed carbon fiber in the shell, we’re keeping scrap carbon fiber out of landfills while creating a light and durable saddle. Add to this hollow Ti rails, and you’ve got a saddle light enough for performance road and XC riding - just 243 grams in a 143 mm width — and tough enough for gravel and trail riding. - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology pad features 22,200 struts and 10,700 nodes, all individually tuned. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Size 143mm / Weight: 239g - Size 155mm / Weight: 245g
$325.00
Specialized's ultra-light S-Works Power saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff FACT carbon fiber shell tuned for support and ride compliance - Super-light PU padding for comfort and support on longer rides - Ultra-light and strong oversized FACT carbon rails - Tough, light and water-resistant cover - Level 1 padding: Lightest level of padding; most direct connection to the bike - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Weight: 143g (143mm), 155g (155mm)
$210.00 - $322.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout. Features - New graphics package with E-MTB endorsement option (15x110mm) - TurnKey lockout gives 'on/off' control - Fits Tires up to 2.8" (15x110mm) - Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look - Plush, highly tunable Solo Air spring - Disc brake compatible - Offset: 51mm (29-inches) - Steerer Diameter: 1.5-inch Tapered
$309.95
- Straight or tapered alloy steerer all road carbon fork - Fender mounts and 6 fork eyelets for water bottles/bags - Includes 12mm/15mm thru-axle on specific versions - Tire clearance for 700x42c 700x40c w/fender or 650Bx50c road plus tires - Steerer: 1 1/8" - 1 1/2" tapered or straight 1 1/8" available - Uncut steerer tube length is 300mm - Platform style racks for supporting randonneur style handlebar bags are okay, using the fork crown hole and lowest eyelet (just above the dropout) - Not compatible with Tubus Tara, Salsa DownUnder, and other lowrider racks, the mounts are designed for light loading only - Steerer tube expander plug not included - 747g - 45mm rake
$309.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset
$300.00
Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach