Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Opening measures 9" across
$10.99 $21.99 50% Off
An adjustable, rear integrated kickstand that supports bikes of all sizes, from 24" to 29" wheels. Adjustable length fits more bikes Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. - Adjustable length fits bikes with 24-29-inch wheels - Compatible with Trek bikes equipped with integrated direct mount chainstays - Will not interfere with pedaling - Super strong and stable platform will hold your bike upright even with gear on the rack
$3.99 - $5.99
Electra's chainguard badges let you customize your bike to suit your personality. The metal badge has an adhesive backing and lays flat in order to fit a full chainguard.
$10.00
Keep that bike upright with a new kickstand. Genuine replacement parts. - Kickstands make it easy to park your bike anywhere while keeping it from getting damaged. - Replacement cruiser integrated kickstand - For easy removal and installation use Electra Cruiser Integrated Kickstand Tool - Fits bikes with 24" wheels
$9.99 - $14.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$24.00
Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
$12.00
Who knows more about dog attacks that the mailman? Letter carriers have had to deal with aggressive dogs since Claudius Polonius was delivering rolls of parchment to citizens of the Roman Empire. So what do the experts use to repel dog attacks? Well, the U.S. Postal Service has been using Halt! Since 1966. You might say they have been conducting field tests for over forty years. Halt! Products use Capsaicin, a naturally occurring extract of peppers, which, when sprayed in a dog's face, causes only temporary, but extreme discomfort for the dog. Think of it as attitude re-adjustment. Halt! Stops dogs in their tracks, giving you time to move out of danger. Halt's pressurized spray is accurate up to 10 feet.
$19.97 $39.95 50% Off
The Road Triple Chain Catcher is engineered to function with triple road cranksets. It is similar to the standard road design with additional length to reach the smaller inner rings down to a 26T. The Road Triple improves overall function of your drive train while protecting your valuable frame from a dropped chain that is common on the triple drivetrains. - 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third party braze-on adapter clamps - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$37.47 - $74.95 $74.95 Up to 50% Off
The K-Edge Road Clamp Chain Catcher functions the same as the original chain catcher, but it mounts to its own CNC sculpted lightweight clamp. K-Edge's Road Clamp-on Chain Catcher improves overall function of your drive train while protecting your valuable frame from a dropped chain. - Prevents missed front shifts and frame damage from a dropped chain - For use with clamp-on front derailleurs - Clamps below and adjusts independently of the front derailleur - Precision machined, anodized 6061 T6 aluminum - 23 grams
$49.00
Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized
$10.99 - $14.00
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
$16.00 - $30.00
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection
$25.00
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 55mm wide x 269mm long - 14 mils thick polyurethane for durability - UV Resistant
$24.99 - $25.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be separated and installed directly to bottle cage mounts on frame - Includes seatpost adaptor and bottle cage bolts - Bottle cage and cartridges sold separately
$40.95 - $65.00
Applications: - Center Kickstand - Push spring movement - Aluminium-die cast GD-AlSi9Cu3 Delivery: - incl. screw and washer - Optional: plate - Kickstand Shoe pair optional Material: - Powder-coated black/metallic silver - Pin steel hardened, galvanized - Screw M10x55 - Washer galvanized F6 Specifications: - Support 58x31x66 - Strut length L1 Modell S 290/26" - Strut length L1 Modell L 320/28" - max. Strut length 28" - Weight Modell L 542g - max. Load 25kg
$10.00
The Sitero Hook attaches to Sitero saddles, allowing bikes to be safely and securely hung in triathlon transition areas. - Replacement Hook for the Sitero
$12.00
We've always had a love-hate relationship with kickstands. When they work properly, they're great-a simple and easy way to leave your bike perched. But somehow, they always seem to fail when you least expect it, ending with a loud CRASH! and a scratched-up bike. So, we decided to develop a kickstand that does its job and does it well. And keep in mind, this kickstand was specifically designed for Rolls with 650b x 2.3" tires. - Specifically designed for Specialized Roll and its 650b x 2.3" tires. - Simple mounting takes the sting out of assembly. - Balances your bike flawlessly.
$19.99 $20.00 On Sale
2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount
$20.00
Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.
$20.00
This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm
$40.00
Turbo Chainstay-Mounted Kickstand - 323mm.
$50.00
This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.
$100.00
Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.
$18.00
• Forged aluminum construction • Center mount design
$24.00 - $35.99
• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction
$35.00
• Aluminum double kickstand • Includes top plate • Adjustable for bikes from 24" to 700c
Page 1 of 1